Anthony96 2 Report post Posted Monday at 14:20 Hey i have win 8.1 sitek yoke throddle and pedels. I have two moniters. when im in fsx i go to my second pc to check things for va etc but when i come back to fsx my throddle dosent work and my yoke and rudder any help thx Share this post Link to post Share on other sites
brett 2,004 Report post Posted Monday at 15:35 Hi Anthony and welcome to the forums here. It could be when you do something on the other screen that in effect you have turned off the screen in FSX, so when you go back to the FSX screen try left clicking the cursor somewhere on the screen to wake it back up. If that doesn't help let us know and we will try something else. Share this post Link to post Share on other sites
Anthony96 2 Report post Posted Monday at 15:40 I do try that but still dosent work it only happens on my payware planes not on the planes that came with fsx Share this post Link to post Share on other sites
Anthony96 2 Report post Posted Monday at 17:57 Any advice Share this post Link to post Share on other sites
J G 829 Report post Posted Tuesday at 09:10 (edited) I have a multi-screen setup with screens running from HDMI, VGA and USB interfaces. I had some issues with Saitek controllers not working. I traced this to a powered hub they were connected to. Playing around I found that: Saitek hardware doesn’t like USB 3. You must plug them into a USB 2 socket. I had to buy a USB 2 Card to get around this issue as I have four Saitek controllers attached to my PC. Saitek hardware is power hungry it needs a big chunk of the power chucked out by USB sockets. A USB hub can’t cope with this if it is not powered. I still found issues when connecting to a powered hub. Saitek controllers would switch out at random intervals. So there are other issues with hubs as well. My eventual solution was to plug all of my controllers directly into the PC, Another reason for buying a USB 2 card. Lastly and still important. I had a USB 3 card that could be switched into USB 2 mode. This didn’t work. It had to be a proper USB 2 card. Hope this helps. Edited Tuesday at 09:11 by J G 1 Share this post Link to post Share on other sites
wain 737 Report post Posted Tuesday at 14:57 have you set your system up so windows can't shut down power to USB ports? by default it will power down any USB's not being used for a short period to save power. I had a big issue with this and a Saitek trimwheel.... 1 Share this post Link to post Share on other sites
Anthony96 2 Report post Posted Tuesday at 17:36 Yes i went in to power options and selectd disabled for usb power auto turn off Share this post Link to post Share on other sites