MutleysHangar.com +
I have setup the CDU fully and on the 'Before Start Checklist' the item called 'CDU Preflight - Completed' the FO says 'You might want to check that again'
I have entered all number and figures into the CDU and where there was any blank entries I have added information too - I have clicked exec - I have the latest patch SP1c
Still no joy!
I have tried many different flights and cannot get past this part - this also stops the engines from being started too.
Anyone got this and had this issue? I ahve looked on the web and also the AVSim forum too - other people have had this but those threads are still ongoing and no resolution has come of this.
Any ideas?
Cheers,
Jim
Welcome to Mutley's Hangar Forums
 |
Welcome to Mutley's Hangar Forums, like most online communities you must register to post in our forums or to take advantage of our download centre, but don't worry, this is a simple and free process that requires minimal information for you to sign up. Be a part of Mutley's Hangar Forums by signing in or creating an account, you can even sign in using your Twitter, Facebook or OpenID account!
|
Guest Message by DevFuse
F2Crew - After setting up the CDU completely I get the FO saying 'you might want to check that'
Started by
UKJim
, May 17 2012 10:52 AM
4 replies to this topic
#1
UKJim
-
- Members
-
- 1,374 posts
- 49 thanks
Senior Captain
-
Country:
- Sim Version:FSX
- Op System:Windows 7(64)
- CPU:Intel 6420 2.13GHz - OC'd @ 3.0GHz
- GPU:HD5670 1GB DDR5 - OC'd @ 900MHz Core 1150MHz Memory
- Ram:4GB
#2
stu7708
-
- Moderators
-
- 1,956 posts
- 38 thanks
Mutley Crew
- Real Name:Mikael Stockfors
-
Country:
- LocationKnivsta, Sweden (Close to ESSA)
- Sim Version:FSX Acceleration
- Op System:Windows 7(64)
- CPU:Intel Core i7 860 @ 2.8 Ghz
- GPU:Zotac GeForce GTX 560 TI OC 1GB PCI-E DVI/HDMI
- Ram:16 Gb DDR III 1600
- Mother Board:Gigabyte P55A-UD3
- Hard Disks:500 Gb + 1 Tb Samsung Spinpoint, 7200 Rpm, SATA
Posted 18 May 2012 - 06:33 AM
what pages have you set up in the CDU..
I can't remember of the top of my head what is needed, but RTE, DEP/ARR and TAKEOFF are among them.
I can't remember of the top of my head what is needed, but RTE, DEP/ARR and TAKEOFF are among them.
#3
UKJim
- Topic Starter
-
- Members
-
- 1,374 posts
- 49 thanks
Senior Captain
-
Country:
- Sim Version:FSX
- Op System:Windows 7(64)
- CPU:Intel 6420 2.13GHz - OC'd @ 3.0GHz
- GPU:HD5670 1GB DDR5 - OC'd @ 900MHz Core 1150MHz Memory
- Ram:4GB
Posted 18 May 2012 - 08:04 AM
All of them pretty much, looking at the manual I have done the pages listed in there.
I also get the same message when asked if parking brake is set - I no its set bcuz I have the red message at the bottom and I've tried clicking it off and on again too.
I'm going to investigate further I think, just thought is post on here in case someone found the same etc
I also get the same message when asked if parking brake is set - I no its set bcuz I have the red message at the bottom and I've tried clicking it off and on again too.
I'm going to investigate further I think, just thought is post on here in case someone found the same etc
#4
UKJim
- Topic Starter
-
- Members
-
- 1,374 posts
- 49 thanks
Senior Captain
-
Country:
- Sim Version:FSX
- Op System:Windows 7(64)
- CPU:Intel 6420 2.13GHz - OC'd @ 3.0GHz
- GPU:HD5670 1GB DDR5 - OC'd @ 900MHz Core 1150MHz Memory
- Ram:4GB
Posted 18 May 2012 - 11:44 PM
OK so I solved it 
I installed the PMDG SP1c update after the install of the FS2Crew - some reason it did not detect this even after a restart so I re-installed FS2Crew after the update and just completed my first flight from start to finish (using button control) successfully
I must admit - even with button control this addon is absolutley amazing.
So the only thing I am still noob at is the programming of the flights - when its a short flight from say East Midlands to Birmingham any route I take seems to take me 50nm out and then brings me back in again to land. I literally fly past the airport as well which is a kick in the teeth.
I have tried all the SIDs and STARs and still no joy - I have updated my FMC to the latest AIRAC too and still no better.
I am going to try a longer flight maybe tomorrow and hopefully that will be easier. Maybe one day when the wife is out I will hook up my headset and use the voice command features - NICE!!
I installed the PMDG SP1c update after the install of the FS2Crew - some reason it did not detect this even after a restart so I re-installed FS2Crew after the update and just completed my first flight from start to finish (using button control) successfully
I must admit - even with button control this addon is absolutley amazing.
So the only thing I am still noob at is the programming of the flights - when its a short flight from say East Midlands to Birmingham any route I take seems to take me 50nm out and then brings me back in again to land. I literally fly past the airport as well which is a kick in the teeth.
I have tried all the SIDs and STARs and still no joy - I have updated my FMC to the latest AIRAC too and still no better.
I am going to try a longer flight maybe tomorrow and hopefully that will be easier. Maybe one day when the wife is out I will hook up my headset and use the voice command features - NICE!!
#5
stu7708
-
- Moderators
-
- 1,956 posts
- 38 thanks
Mutley Crew
- Real Name:Mikael Stockfors
-
Country:
- LocationKnivsta, Sweden (Close to ESSA)
- Sim Version:FSX Acceleration
- Op System:Windows 7(64)
- CPU:Intel Core i7 860 @ 2.8 Ghz
- GPU:Zotac GeForce GTX 560 TI OC 1GB PCI-E DVI/HDMI
- Ram:16 Gb DDR III 1600
- Mother Board:Gigabyte P55A-UD3
- Hard Disks:500 Gb + 1 Tb Samsung Spinpoint, 7200 Rpm, SATA
Posted 19 May 2012 - 07:03 AM
Good thing you solved it, cause I was out of ideas 
Good luck with your flights...
Good luck with your flights...
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
